5-sided hollow, extremely fast heat dissipation
2*100M RJ45 LAN ports + 300Mbps Wi-Fi
Choose the best channel, reduced debugging, no interference
Built-in 2 high-gain antennas
64M large memory, stable capacity of 20 units
| Produce model | NAP876 |
| Standards | 支持IEEE802.3af /at協議供電 |
| Port |
ront: One 10/100M RJ45 port Back: One 10/100M RJ45 port, support IEEE802.3af /at protocol power supply |
| Forwarding rate | 10/100Mbps |
| Wireless specifications | 2.4GHz：300Mbps |
| Antennas | 2 built-in high-gain antennas |
| Memory | 64M |
| FLASH | 8MB |
| Button |
Press and hold for 5S to restore the default state Tap once to turn off or on the LED light |
| LED indicator | PWR, WIFI status, LAN port indicator, network status indicator |
| Size | 88mm×88mm×13mm |
| Operating environment |
Operating temperature: 0°C ~ 40°C Storage temperature: -20°C ~ 70°C Operating humidity: 10% ~ 90%, non-condensing Storage humidity: 5% ~ 90%, non-condensing |
| Home page |
Device runtime CPUand memory usage Overall traffic view Signal strength distribution |
| Wireless settings |
Wireless switch Wireless basic configuration (SSID/encryption method/frequency point/terminal keep-alive time/user group) Wireless advanced settings (wireless mode/bandwidth/channel/isolated wireless users/transmit power/client connections/weak signal rejection/weak signal prohibition) Device positioning Panel light switch Support telecom Elink protocol |
| Network settings |
AC address setting Intranet settings (DHCP Client on/off) |
| Cyber security |
User group management Terminal connection log |
| System settings |
Time setting System upgrade Change password restore to factory settings restar |
1. Check whether the dns packet of baidu is sent once for 60 seconds
2. Broadcast packets and multicast packets are not forwarded to the receiving interface (key)
3. Unicast packets are not converted into broadcast packets with ppp headers (key)
4. The IP and MAC addresses of sta_info sent to AC are correct mac and IP
5. Add the wireless vlan function
Upgrade Description:
This firmware is applicable to the AP-NAP874G upgrade of LEI Ke panel
New wireless Qvlan feature
